It’s quite aggravating to be unable to start your computer. There could be several reasons why it isn’t working. A ‘dead Motherboard’ could be one of them, and while not the worst, it is quite terrible.
But how can you know if your motherboard is dying or if it is functioning properly and something else is causing the problem? With the exception of a few PC experts, most users have no idea how to find out. So, if you’re similarly perplexed, there’s nothing to worry about; we’ll assist you.
What Is A Motherboard?
A Motherboard, as we all know, is a circuit board with chips as well as other elements and is one of the most important components in the system. A Motherboard, on the other hand, is much more. It contains thousands of bits that a typical user would be unfamiliar with.
Motherboard is a circuit board that serves as the computer’s basis. This board supplies electricity to the grid and facilitates communication with the RAM and other hardware components. It serves as the primary link between the RAM, hard drive, and video card. It is also known by the abbreviations MB, main circuit board, and a few more terms. It has hundreds of micro-components, such as inductors, capacitors, and many others, in addition to the primary components.
What Is A Dead Motherboard?
A malfunctioning board that has quit working for various reasons is described as a ‘Dead Motherboard.’ Some or all of the components on dead Motherboards stop working, preventing them from communicating with and among the computer’s components. A PC cannot turn on if the Motherboard is dead. As a result, if one is dead, you must change it with a functioning one if you want to continue using the computer.
Causes
The Motherboard, as well as its components, are extremely delicate. Small acts of wrongdoing can cause it to die swiftly or gradually. A motherboard can fail for a variety of causes, the most prevalent of which is overheating. Let’s take a closer look at everything that causes a Motherboard to die.
- Overheating- Over time, heat damages and destroys the hardware components.
- Overclocking the CPU and GPU for an extended period of time- Overclocking leads the computer to overheat.
- Cables that are incorrectly connected or are only partially attached.
- Misplacement or incorrect placement of components.
- Proper cooling components, such as fans, liquid cooling, and heatsinks, are missing or failing.
- Inside the CPU chamber, there is a lot of dust.
- Power surges and electrical spikes.
- A voltage supply change that is out of the ordinary.
- Excessive bare-hand contact with Motherboard components.
These were some of the main reasons that cause a motherboard’s death. Other explanations may exist, but they will all result in the heating or failure of an important Motherboard component, leading it to fail and die.
How To Tell If Motherboard Is Dead?
When a Motherboard fails, identifying and comprehending the situation becomes extremely difficult. This is due to the fact that the failure of a Motherboard shares many of the same symptoms as the failure of other components. Often, we assume the Motherboard is gone, but it isn’t, and other components, such as the Power Source, are.
The very first thing that occurs when a Board expires is that the laptop switches off for eternity. No matter how hard you click the Power button, it will not turn on. However, there could be a variety of additional causes for the PC’s inability to turn on. So, what’s the best way to figure out what’s wrong?
Diagnosing A Dead Motherboard
To determine if a board is dying, you must perform a series of tests on it. Following are the steps you can take in order to diagnose the problem.
- PSU Malfunctioning
The first thing you should look at is the power supply (Power Supply Unit). The most straightforward method is to insert it into a working system and see whether it turns on. If it turns on, the power supply is fine; if it does not, the power supply is dead. If you have a spare PSU, you can try using it on your PC.
- Processor Overheating
If the Power Supply Unit is working properly, you should check to see if the Processor is overheating. As a precaution against overheating, a computer will occasionally turn itself off. So, just allow your Computer a little time to calm down.
- Battery Health
If you’re using a laptop, make sure the battery is in good shape. Connect the charger to your laptop and attempt turning it on. If it does, your battery has died completely.
- Other Hardware Issues
When you try to boot the computer, see whether you get a ‘Beep code.’ A beep code indicates a hardware problem. The beep codes used by different motherboard manufacturers are different. To learn more about them, consult the user handbook. A quick Google search can also be beneficial.
- Power Light Indication
Check to see if the power light on the Motherboard is on or off. If it’s off, that’s the most telling sign.
- Visual Inspection
Visually inspect the capacitors for any bulging, bents, or blown capacitors. If they’re there, the Motherboard is almost certainly dead.
Motherboard Is Dead, Now What?
When a Motherboard fails, the only option is to replace it with a new or functioning one. If your computer or laptop is still under the company’s warranty, you can get it fixed for free at a service center. If the warranty has expired, you can take it to a service center and get it replaced. It is not prohibitively expensive. If you have enough experience or have formerly built a PC, you can even buy a brand new Motherboard and change it yourself.
Also, do not attempt to fix a Motherboard because they are far too complicated for a typical human to handle. Simply purchase a replacement and use it in place of the deceased.
To Conclude
A motherboard is the core circuit and the backbone of a computer, acting as a communicator between its many components. The Motherboard can die for a variety of reasons, the most prevalent of which is extreme temperature. You can determine whether a Motherboard is dying by looking at it like this. When it dies, you have no choice but to replace it.
